Lab 3. Remote Access RouterBoard Mikrotik
The Purpose
1.
Knowing
the history of Mikrotik.
2.
Knowing
how to Remote Access RouterBoard Mikrotik via Winbox.
3.
Knowing
how to Remote Access RouterBoard Mikrotik via Telnet Client.
4.
Knowing
how to Remote Access RouterBoard Mikrotik via Putty.
5.
Knowing
how to Remote Access RouterBoard Mikrotik via HyperTerminal.
6.
Knowing
how to Remote Access RouterBoard Mikrotik via Webfig.
The Basic Concept
“The History of Mikrotik”
Mikrotik
is a Small company in Latvia, side by side with Rusia. The formed by John
Trully and Arnis Riekstins. John Trully is an American who immigration to
Latvia. In Latvia, he meet with Arnis Riekstins a undergarduate Physics and
Mechanic about 1995. In 1996 John and Arnis to start with the system Linux and
MS DOS that combined with technology Wireless LAN (W-LAN) Aeronet speed 2Mbps
in Moldova. It was only then serve five customers in Latvia, because ambition
they are making one equipment soft routers that are reliable and distributed
throughtout the world.
The
basic principle they’re not making Wireless ISP (W-ISP), but make program a
router that are reliable and can run around the world. Latvia only a test site
John and Arnis, because when this they’ve been helping the country – other
countries, including positions that serve about 400 users. Linux that they use
the first time is kernel 2.2, that the developed jointly with the 5-15 people
on the Research and Development (R&D). According to Arnis, in addition to
the staff in the environment Mikrotik. They also recruiting the power off and
the third that with intensive development Mikrotik in the marathon.
Configure how to Remote Access
RouterBoard Mikrotik
After doing installation mikrotik in
GNS3, prepare the materials is needed, is :
1.
Winbox.exe.
2.
Putty.exe
3.
Telnet
in windows
4.
Webfig
5.
HyperTerminal
Remote Access
on Winbox.ex
1.
Jalankan
winbox.exe pada klien windows 7.
Run winbox.exe
to the client windows 7.
2.
Klik
browse pada Connect to. Jika sudah muncul mac address beserta Ipnya,
klik.
Click ‘browse’ on Connect to. If it a came mac address with
IP, click.
3.
Klik
Connect.
Click connect.
4.
Klik
OK saja.
Click OK.
5.
Pilih
IP lalu Addresses.
Choose IP,
and then Addresses.
6.
Klik
IP.
Click IP.
7.
Ubah
IP yang kalian inginkan. Lalu klik Apply > OK.
Change IP do
that you want. Then, click Apply > OK.
8.
Ip
server sudah diubah, sekarang ubah IP klien.
IP server is in
change, now you would do change the ip client.
9.
Pilih
IPv4.
Choose IPv4.
10.
Ubah
IP klien
Change IP
Client.
11.
Lakukan
perintah ping dari klien ke server.
Do that order
ping from Client to Server.
12.
Coba
hapus IP yang baru dibuat tadi di winbox.exe
Try to remove
do a newly created was ini winbox.exe
13.
Dan
pada klien diubah lagi menjadi 192.168.88.2
And on the
client in change it again to be 192.168.88.2
Remote Access
Mikrotik on Webfig
1.
Buka
web browser, lalu ketikkan IP server.
Open a web
browser, and then typing the IP server
14.
Akan
muncul tampilan seperti ini.
Will came the
appear like this
15.
Ubah
IP nya lagi menjadi 192.168.1.1 pada RouterBoar Mikrotik.
Change the ip
to 192.168.1.1 on the RouterBoard Mikrotik
16.
Pada
klien juga diubah.
On the client,
changed it
17.
Coba
reboot winbox nya.
Try to reboot
the winbox it
18.
Lakukan perintah ping dari klien ke server.
Do it order ping from client to server
19.
Masuk
ke winbox menggunakan IP server yang sudah diubah.
Get in the
winbox the use of the ip server that has been in change
Remote Access
Mikrotik on Winbox with Terminal
1.
Masuk
ke terminal yang ada diwinbox.
Get in the
terminal at winbox
2.
Karena,
tadi sudah buat dua IP, yaitu IP yang aktif dan tidak aktif. Yang aktif angka
1, dan yang tidak aktif angka 0.
Because you
would have made 2 ip, namely do an active and inactive. The number 1 is active,
and the number 0 is inactive.
3.
Lakukan
pengeditan pada ip address dengan perintah seperti dibawah ini. Ip yang akan
diedit adalah yang aktif, pilih number 1.
Do the editing
IP Address with such orders under this. The ip will edit it is an active,
choose number 1
4.
Tambahkan,
lalu save.
Added, and then
save it.
5.
Ip
server tadi sudah diubah, sekaran kliennya juga diubah.
The ip was
edited, now the change ip client
6.
Lakukan
perintah ping.
Do the order
ping
Remote Access on Mikrotik with Telnet.
1. Pada cmd, klik perintah telnet 192.168.2.1
At the CMD, click the order telnet 192.168.2.1
2. Jika berhasil, dia akan langsung terhubung.
If the successful, it will the connected
3. Namun jika gagal, berarti pada windows 7 anda
belum terinstal paket telnet. Untuk menginstalnya bisa buka Control Panel
> Program > Program and Features > Turn windows features on or off.
Lalu cari option Telnet Client, lalu ceklis terus OK.
But if the failed, then on windows 7 you haven’t
installed the telnet. For the actived them, can open Control Panel >
Program > Program and features > Turn windows features on or off. And
then, ceklist and OK
Remote Access on Mikrotik with Putty.
1. Masukkan IP server, lalu masukkan juga port 22.
Klik open.
Get in the IP server, and then get in port 22.
Open click
2. Akan muncul tampilan seperti ini. Klik yes.
Will came the appear like this. Click yes
3. Jika berhasil.
If it success
Remote Access on Mikrotik with HyperTerminal.
1. Masukkan IP address server dengan port number 23.
Get in the IP address server with the port number 23
2. Jika berhasil.
If the success
SORRY IF THERE WAS WRITING THE INCORRECT LANGUAGE
~ THANK YOU ~
