Lab 6. NetInstall RouterBoard Mikrotik
The Purpose
1.
Knowing
the history of Mikrotik.
2.
Knowing
how to NetInstall RouterBoard Mikrotik.
The Basic Concept
“The History of Mikrotik”
Mikrotik
is a Small company in Latvia, side by side with Rusia. The formed by John
Trully and Arnis Riekstins. John Trully is an American who immigration to
Latvia. In Latvia, he meet with Arnis Riekstins a undergarduate Physics and
Mechanic about 1995. In 1996 John and Arnis to start with the system Linux and
MS DOS that combined with technology Wireless LAN (W-LAN) Aeronet speed 2Mbps
in Moldova. It was only then serve five customers in Latvia, because ambition
they are making one equipment soft routers that are reliable and distributed
throughtout the world.
The
basic principle they’re not making Wireless ISP (W-ISP), but make program a
router that are reliable and can run around the world. Latvia only a test site
John and Arnis, because when this they’ve been helping the country – other
countries, including positions that serve about 400 users. Linux that they use
the first time is kernel 2.2, that the developed jointly with the 5-15 people
on the Research and Development (R&D). According to Arnis, in addition to
the staff in the environment Mikrotik. They also recruiting the power off and
the third that with intensive development Mikrotik in the marathon.
Configure how to Netinstall
RouterBoard Mikrotik
After doing installation mikrotik in
GNS3, prepare the materials is needed, is :
1.
Winbox.exe.
2.
Netinstal
RouterBoard.
1.
Ubah
IP klien.
Change the IP
Client
2.
Pada
winbox.exe , buka Address List dan ubah IP RouterBoard Mikrotik.
On the
winbox.exe , open address list and change IP RouterBoar Mikrotik
3.
Lakukan
perintah ping dari klien ke server.
Do the order
ping from client to server
4.
Jalankan
NetInstal dengan Run Administrator.
Run the
Netinstall with Run Administrator
5.
Pilih
NetBooting.
Choose the
NetBooting
6.
Masukkan
IP lainnya, bukan IP server maupun klien. Jangan lupa di ceklist.
Get in the
other IP, not the IP server or Client. Dont forget to ceklist
7.
Pada
winbox, pilih System > RouterBoard.
On the winbox,
choose System > RouterBoard
8.
Pilih
Setting.
Choose Setting
9.
Pada
kotak Boot Device, pilih try-ethernet-once-nand. Klik Apply lalu OK.
On the table
Boot Device, choose try-ethernet-once-nand. Click the Apply then OK
10.
Lalu
, reboot winbox.exe
Then, rebooting
the winbox.exe
11.
Jika
sudah, pindahkan kabel LAN pada RouterBoard Mikrotik dari port dua ke port
satu. Jika dia berhasil, akan muncul di winbox. Contohnya seperti ini.
If it is, moved
the LAN cable on the RouterBoard Mikrotik from the second port to first port.
If the success, will came at the winbox. The example like this
12.
Klik
type RB yang berada di winbox, lalu klik install.
Click the type
of RB in the winbox, then install click
13.
Proses
penginstalan.
The proccess of
installation
14.
Buka
winbox.exe
Open the
winbox.exe
15.
Pada
winbox, akan terlihat versinya sudah berubah.
On the winbox,
will see the version has been change
16.
Dan
IPv6 nya pun, akan teraktifkan.
And the IPv6
will be actived
SORRY IF THERE WAS WRITING THE INCORRECT LANGUAGE
~ THANK YOU ~
